Grow Light System

VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450

VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450

VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450
VIPARSPECTRA LED grow lights are designed to provide high levels of PAR ideal for indoor horticulture plants from peppers to plants. We customized our light spectrum to optimize plant growth and increase yields while consuming less energy and reducing operating costs compared with traditional horticulture technologies. With 10 years of expertise and development, VIPARSPECTRA is recognized as the most durable LED grow lights on the market. Dimensions: 16.1x8.3x2.8 inches. Item Weight: 8.4 lbs.

Vegetative Coverage at 24 Height: 2.5x2.5 ft. Flowering Coverage at 18 Height: 2x2 ft. Actual Power Draw: 200W±3% at 120V. Amperage: 1.67A at 120V, 0.90A at 220V. LED Bulbs: (90pcs) High Intensity 5W Epiled/Bridgelux LEDs.

The V450 as a whole is UL Certified. The optimal full spectrum provides plants with everything they desire in the natural sunlight. The Reflector design increase PAR output by 50%.

The daisy chain feature to use multiple lights together. Advanced cooling system are easy for heat dissipation. To meet the different spectrum demands of vegetative and flowering stage of plants growth, the V450 uses separated VEG and BLOOM switch to control the veg and bloom spectrum individually.

Please turn on both VEG and BLOOM switches for flowering stage. The Reflector Design increase PAR Output by 50% is scientifically engineered to keep the balance with excellent PAR Output and suitable Coverage. This design reflects more light to the plants, at the same time will not far too concentrated in the middle of the growing area which results in stunted plant growth and sunburning.

The daisy chain feature which assists growers to use multiple lights together with less outlet. No additional cords is needed, just simply plug in the provided power cord into the second light's outlet to achieve connection among multiple units. HOW TO COMPARE LED GROW LIGHTS? If you have been researching LED grow lights for your plant growth facility, you have likely been bombarded with a variety of metrics that lighting manufacturers use to market their products: watts, lumens, LUX, PAR, PPF, PPFD.

In order to explain the correct method for evaluating a horticulture lighting system, lets first highlight two of the metrics used today that you need to avoid. RULE 1: DON'T FOCUS ON THE WATTAGE OF THE LED'S. Do you use 5W, 10W, or 15W LEDs? We are asked this question on a frequent basis, but the wattage of the LED use in light does not tell you anything meaningful about the lighting system's performance since LED and fixture efficiency varies widely. Remember, the LED wattage is a system input, and growers care about the system output--PAR Output. Hence, the lighting system using 10W or 15W LED wattage doesn't deliver more light to your plants than lighting system using 5W LED wattage. RULE 2: DON'T LOOK AT A SINGLE PPFD MEASUREMENT. Unless you are growing a small plant directly under your light, a single PPFD measurement doesnt tell you much. However, unless you are only growing one plant in this exact location, you need to know how much PAR is being distributed across the entire canopy. Three important questions you should look to be answered when researching LED grow lights are.

How much instantaneous PAR from the fixture is available to plants (measured as PPFD)? How much PAR is being distributed across the entire canopy? How much wattage is used by the fixture to make PAR available to your plants? The three key metrics of the V450 used to answer these questions are.

PPFD directly under the Fixture. PPFD is photosynthetic photon flux density.

PPFD measures the amount of PAR that actually arrives at the plant, or as a scientist might say: the number of photosynthetically active photons that fall on a given surface each second. PPFD is a spot measurement of a specific location on your plant canopy, and it is measured in micromoles per square meter per second (mol/m2/s).

PPFD over a 2.5x2.5 Area. If you are growing over a 2.5 x 2.5 area, you need to review the PPFD levels over the entire area to calculate the average light level the lighting system is providing. If you only had a center point measurement you may assume a fixture is extremely powerful.

However, you would need multiple measurements across the 2.5×2.5 grow area to calculate the average amount of PAR that is provided by the fixture. In general, for well-designed full spectrum lighting system, the higher actual power draw is, the higher PAR Output a lighting system emits to plants. The item "VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450" is in sale since Tuesday, April 6, 2021. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics\Grow Lighting & Accessories\Grow Light Kits". The seller is "beautifulhi" and is located in Alhambra, California.

This item can be shipped to United States.

  • Product Dimensions: 15.8 x 8.4 x 2.4 inches
  • Item Weight: 6.4 pounds
  • Shipping Weight: 10.05 pounds
  • Manufacturer: VIPARSPECTRA
  • Item model number: V450
  • Size: V450 450W
  • MPN: V450
  • Color: Black
  • Custom Bundle: No
  • Type: LED Light Panel
  • Installation Area: Indoor


VIPARSPECTRA UL Certified 450W LED Grow Light, with Daisy Chain, Veg V450