This is the SANLIGHT Q6W Series Gen2. Broadband, continuous light spectrum specially for fruit forming plants. Flexible Performance Oriented Future Proof. The 2nd generation of the Q-Series was developed to live up to our reputation as the technological market leader and to extend that lead.For you as a user, this means maximum exibility with the best system efficiency and usability. The light module, which forms the basis of the Q-Series, features the latest OSRAM 2mm2 LED chip technology, which facilitates the generation of a broadband optimal light spectrum with an efficiency of 2.7mol/J. The secon- dary optics, trimmed to minimise loss, direct almost every photon (more than 95%) directly to your cultivation area. The optimised heat sink not only ensures minimal temperatures on the LED chip. We give you the options you decide. The Q-Series models are designed so that the right solution is available for any mounting situation. For classic cultivation areas we offer an ECO solution or an EXPERT setup. That means you choose between maximum energy savings and cost efficiency or maximum yield.
Options such as power boost or dimmer allow you to expand your systems range of performance or adapt it to new conditions. Every light in the Q-series is prepared for this, READY-TO-DIM and READY-TO-BOOST.
Of course, the lights can be daisy-chained to each other. Several lights can be powered by a single power source.Each Q-Series can be kept state-of-the-art cost effectively and efficientlyby simply replacing the light modules, which are also upgradeable. We also offer the Q-Series as a PQ-Series with a IP65 approval for commercial and industrial installations. This means even better protection against environmental influences and other options. Also see our full range of available Sanlight LED lights and accessories. General information about the Sanlight Q Series Gen2.
SANLIGHT Q-SERIES GENERATION 2 OVERVIEW Horticultural LED-lighting Technical Specifications 115 624 PPF Broad spectrum, continuous light spectrum especially for fruit-forming plants Power consumption from 50 to 245 watts Power factor > 0.95 Beam angle 90° Rectangular and homogeneous illumination of the cultivated area 3-year guarantee Modules can be exchanged at certificated SANlight sales partners 90% light output after 100,000 hours Daisy-chainable Ready-to-dim Passively cooled in the emission wavelength range Typical Applications Illumination of plants indoors which require a lot of light in the vegetative phase Illumination of plants indoors which require a lot of light in the generative phase Cultivation of ornamental plants and crops Complete and environmentally friendly replacement of high pressure sodium lamps ECO setup Yield maximization compared to high pressure sodium lamps EXPERT setup HIGHLY EFFICIENT LED PLANT ILLUMINATION SYSTEM FOR INDOOR APPLICATIONS Flexible Performance-Oriented Future-Proof The 2nd generation of the Q-series was developed to live-up to our reputation as the technological market leader and to extend that lead. For you as a user, this means maximum flexibility with the best system efficiency and usability. The light module, which forms the basis of the Q-series, features the latest 2mm2 LED chip technology, which facilitates the generation of a broadband optimal light spectrum with an efficiency of 2.7mol/J.
The secondary optics, trimmed to minimise minimize loss, direct almost every photon (more than 95%) directly to your cultivation area. The optimised optimized heat sink not only ensures minimal temperatures on the LED chip.
100,000hrs are no problem for a SANlight. Passive cooling The large-dimensioned aluminium heat sink keeps the LED chip temperature in the cool range even at high ambient temperatures. This improves the efficiency and reliability of the system, even in the case of heavy soiling and harsh environments. Expandable All Q-series models have an interface that allows the connection of different systems for dimming and controlling the light. In addition, a certificated SANlight partner can boost the light output from the light by 10% via this interface.
Power consumption Q3WL 120W Q4W 165W Q4WL 165W Q5W 205 W Q6W 245W Power factor >0.95 Input voltage range 90 305 VAC 90 305 VAC 90 305 VAC 90 305 VAC 90 305 VAC in the emission wavelength range from 400 780 nm Power factor PPF Weight 312 4.24 kg 416 4.61 kg 416 5.11 kg 520 5.5 kg 624 6.15 kg Protection class IP40 IP40 IP40 IP40 IP40 Technical drawing Q3WL Technical drawing Q4WL Technical drawing Q6W Technical drawing Q4W Technical drawing Q5W Spectral Power Distribution Color space classification according to CIE1931 Prepared for the future. Ready to dim All Q-Series Gen2 models are ready-to- dimm. This means that you can equip the lights subsequently with a dimmer.
This is simply plugged into the slot provided on the lamp. M-Dim The simplest dimmer variant is the M-Dim. You connect the dimmer module to your light and can then dim each individual light via a magnetic switch. In addition, you can activate a sunrise simulation.
No communication via a network, simple to use, cost-effective and reliable. Bluetooth dimmer The Bluetooth dimmer is also simply plugged into the light.All lights can be addressed together (cluster) or each light separately. Functions such as simple dimming, daytime-dependent dimming, etc. Can be set via the app. Easy to use and inexpensive installation for large systems. If you, as the owner of a model of the Q-Series Gen2, need more power, for example, because your growing conditions are changing larger growing cabinet, etc.
, a SANlight authorized dealer can boost the light. This means you get 10% more light output.
Upgradeable The lamp can be kept state of the art with the possibility of an upgrade. Your official SANlight dealer can easily replace the light modules with the latest gene- ration of modules. DAISY CHAINABLE Daisy-chaining enables you to grow from small spaces of 0.36m2 to 7m2 with one AC-plug. Extension cable Power cable 2m H Connector WE HAVE THE SOLUTION, YOU HAVE THE CHOICE For standardized cultivation areas we offer an ECO setup as well as an EXPERT setup.
You decide what is most important to you. ECO setup In the design of these setups, we have taken care to achieve the same yield as with corresponding sodium vapor lamps while minimizing power consumption. An average 600W sodium vapour lamp emits about 840mol/s. 1.44m2 is thus exposed to 580mol/m2/s. A SANlight Q4WL Gen2 emits 416mol/s.
If 2 units are used on the same surface (1.44 m2), this system achieves an illumination density of 580 mol/m2/s. The same yields with better quality can be expected and you save about 50% on energy costs.
ECO setup at a glance Minimum power consumption, with similar yield to a high pressure sodium lamp Low acquisition costs Forgiving EXPERT setup The focus here is clearly on maximising harvest. While with a 600W sodium vapour lamp 840mol/s photons illuminate your plants, with 2 Q5W units, a photon flux of 1025mol/s is generated.
This means that the illumination density is 25% higher. Nevertheless, even with the Expert setup, you can calculate an energy saving of about 35%. With appropriate gardening skills, the yields will be better both qualitatively and quantitatively.
We recommend using this system with dimming, and only applying the full performance of your system in the last few weeks. EXPERT setup at a glance Dimmer recommended Maximize your harvest in quality and quantity Higher acquisition costs Photosynthesis at the limit No dimmer needed Product Q1W Gen 2 Q3WL Gen 2 Q4W Gen 2 Q4WL Gen 2 Q5W Gen 2 Q6W Gen 2 60x60 cm = 0.36m2 80x80cm = 0.64m2 100x100 = 1m2 120x120 = 1.44m2 MADE IN AUSTRIA BLUDENZ IN THE HEART OF THE ALPS SANlight stands for quality, reliability and maximum efficiency. RESEARCH MEASURING TECHNOLOGY PRODUCTION CONSULTING We are an innovative Austrian company, with headquarters in Bludenz, where we develop and manufacture high-quality LED horticultural solutions for commercial greenhouses as well as at home and for hobby purposes.Our capability to rapidly develop new market innovations enables us to continually provide innovative technology to our customers. With our technical and theoretical background knowledge, and 7 years of experience we can assure you our products are the best. Manufacturing process in Austria guarantees you the best quality and highest support for your grow. The item "SANLIGHT Q6W GEN 2 HIGH EFFICIENT LED PLANT ILLUMINATION SYSTEM GROW LIGHT LAMP" is in sale since Saturday, March 7, 2020. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics & Seed Starting\Grow Light Kits". The seller is "sanlightusa_com" and is located in New Castle, Delaware. This item can be shipped worldwide.